Replacement The standard Tyent
replacement cartridge filters are for all Tyent water ionizer
models except the UCE-9000 under counter model. The standard
filter will work in the Tyent MMP-5050, Tyent MMP-7070, Tyent MMP-7070
Turbo, and Tyent MMP-9090 Turbo Extreme water ionizers.
There are two types of .01 Micron Tyent filters
available. One set will work in all counter top models including the
Tyent MMP-5050, Tyent MMP-7070, Tyent MMP-7070
Turbo, and Tyent MMP-9090 Turbo water ionizers. The other
set of .01 Micron filters will only work in the Tyent
UCE-9000 under counter extreme model.
There .01 Micron Ultra Filtration replacement filters contain
the same filtration media but they have different treading. They
both have a 951 gallon cycle (equivalent to 6
months) by the standard of the passing water quantity of 5 gallons
All the filters function in the same basic
fashion. The detailed explanation below applies to all the
Phi water type purifying filters:
The filters consisting of the 1st high efficient filters and the
2nd functional filters realize the best clean water status
fitted to serviced water.
The first filter
is the Primary Active Carbon Filter (ACF). This
filter filters relatively large suspended matter like rust and
dregs, residual chlorine in water, and volatile organic
The second filter
is a composite ceramic filter. It is broken
down into 3 parts:
M ceramic: keeps the balance of ions. It is anion ceramic
P ceramic: It has plenty of inorganic minerals and gives good
heat conductivity, and dissolves nutrients well to convert into
the ingredients for human body to react well. Thus, it improves
metabolism of human body.
K ceramic: It has plenty of mineral and makes water stable
because this ceramic has been baked from the clay fermented by
The filters have a 3,600 liter cycle (equivalent to 6 months) by
the standard of the passing water quantity of 20 litres a day.
Filter change cycles are designed to be displayed by voice
guides and LCD icons to be easily known.
How To Use
The Tyent Water Ionizer